Keeping your Harley-Davidson® dialled for the next adventure has never been easier.
This Officially Licensed Harley-Davidson® Motorcycle Care Range is the ultimate solution to care and protect for your ride.
Keeping your machine looking mean, because it deserves nothing less.
RESPECT THE LEGEND.
Want that deep, head-turning Harley-Davidson shine? Follow these simple steps to get the...
Read More
When it comes to keeping your Harley-Davidson® looking its best, most riders stop...
Read More
Nothing turns heads quite like a matte-finish Harley-Davidson. That stealthy, aggressive look hits...
Read More
The best way to clean or wash a Harley-Davidson is to use a motorcycle-specific wash followed by protection. Work on a cool motorcycle, out of direct sunlight, and rinse away loose dirt first so it can't be dragged across the finish.
Spray on Muc-Off x Harley-Davidson® Bike Wash and let its Nano Tech formula break down road grime, agitating stubborn areas with the Muc-Off x Harley-Davidson® 3X Brush Kit before rinsing thoroughly — don't let the cleaner dry on the surface. Dry the motorcycle with the Muc-Off x Harley-Davidson® Luxury Microfibre Polishing Cloth.
Once dry, apply Muc-Off x Harley-Davidson® Protect & Shine to suitable surfaces to drive out residual moisture, help prevent corrosion and reduce dirt adhesion between washes.
For a glossy, water-resistant finish on suitable paint, metal and plastic, follow with Muc-Off x Harley-Davidson® Speed Wax, keeping it away from braking surfaces, grips and foot pegs.
If the motorcycle only has light dust between rides, Muc-Off x Harley-Davidson® Waterless Wash gives a quick clean without water.
For a full wash, the best cleaner in the Muc-Off x Harley-Davidson® range is Bike Wash. Its Nano Tech formula is designed to break down dirt and road grime and is suitable for Harley-Davidson paint, chrome and blacked-out finishes. Use it when the motorcycle needs a proper rinse-based clean after dirty rides or long miles.
For lighter cleaning between rides, choose Muc-Off x Harley-Davidson® Waterless Wash, which cleans and polishes without water while encapsulating surface dirt to help prevent scratching.
For specific contamination, Muc-Off x Harley-Davidson® Bug & Tar Remover targets bug splatter and tar.
After cleaning, Protect & Shine adds corrosion protection, while Speed Wax adds gloss and a hydrophobic barrier.
A Harley-Davidson can be cleaned with a pressure washer, but avoid directing high-pressure water at close range onto sensitive components. Keep the jet away from electrical connections, bearings, seals, controls and other vulnerable areas.
Let Muc-Off x Harley-Davidson® Bike Wash do most of the work: rinse loose dirt, spray on the cleaner, agitate stubborn grime if needed, then rinse from a sensible distance. Work on a cool motorcycle and do not let the cleaner dry.
Afterwards, dry the Harley-Davidson thoroughly and apply Muc-Off x Harley-Davidson® Protect & Shine to suitable surfaces to drive out residual moisture and help protect against corrosion.
Give a Harley-Davidson a full wash at least every one to two weeks (depending on how frequently you ride), and sooner whenever dirt, road grime, bugs or road salt builds up.
A full wash is especially worthwhile after dirty rides, long journeys or exposure to winter road contamination.
Use Muc-Off x Harley-Davidson® Bike Wash for deeper cleaning when rinsing is required.
Between full washes, Muc-Off x Harley-Davidson® Waterless Wash is designed for light dust and quick maintenance without water.
Bug splatter and tar should be dealt with promptly using Muc-Off x Harley-Davidson® Bug & Tar Remover.
After a full wash, dry the motorcycle and apply Muc-Off x Harley-Davidson® Protect & Shine to help prevent corrosion and reduce dirt adhesion between washes.
The best way to clean and polish chrome on a Harley-Davidson is to start with Muc-Off x Harley-Davidson® Bike Wash, which is safe for chrome as part of the officially licensed care range. With the motorcycle cool and out of direct sunlight, rinse the chrome first, apply Bike Wash to break down road grime, then gently agitate difficult areas with a suitable brush from the 3X Brush Kit before rinsing thoroughly.
Dry using the Muc-Off x Harley-Davidson® Luxury Microfibre Polishing Cloth.
Once the chrome is clean and dry, shake and apply Muc-Off x Harley-Davidson® Speed Wax, allow it to haze for about a minute, then buff with a clean microfibre cloth for a deep, hydrophobic, water-resistant gloss.
For ongoing protection between washes, Muc-Off x Harley-Davidson® Protect & Shine drives out moisture and helps prevent corrosion while preserving metal and chrome. Keep wax and protectant away from braking surfaces, grips and foot pegs.
For light surface rust or corrosion on Harley-Davidson chrome, start by cleaning the area rather than immediately using an abrasive polish.
Wash the cool surface with Muc-Off x Harley-Davidson® Bike Wash, rinse thoroughly and dry it so you can assess the chrome accurately.
If corrosion has penetrated, pitted or lifted the chrome plating, cleaning products will not restore damaged plating; follow Harley-Davidson guidance or seek professional repair.
To help prevent further corrosion on sound surfaces, apply Muc-Off x Harley-Davidson® Protect & Shine to appropriate areas. It drives out moisture and leaves a non-sticky protective layer designed to help prevent corrosion while preserving metal and chrome.
Muc-Off x Harley-Davidson® Speed Wax can add a hydrophobic barrier and gloss to suitable clean metal surfaces. Regularly removing road salt, moisture and grime is more effective than trying to correct established corrosion later.
The best way to prevent rust on a Harley-Davidson is to keep corrosive contamination off the motorcycle, dry it thoroughly and apply protection after washing. Road salt, moisture and grime can accelerate corrosion, so clean the motorcycle with Muc-Off x Harley-Davidson® Bike Wash after dirty or winter rides and rinse thoroughly.
Dry accessible surfaces with the Muc-Off x Harley-Davidson® Luxury Microfibre Polishing Cloth.
Then apply Muc-Off x Harley-Davidson® Protect & Shine to suitable areas. It is designed to drive out moisture, help prevent corrosion and leave a non-sticky protective layer that also reduces dirt adhesion between washes. Pay particular attention after wet rides or road-salt exposure.
On suitable paint and metal, Muc-Off x Harley-Davidson® Speed Wax can add a hydrophobic, water-resistant finishing barrier.
To clean a Harley-Davidson engine and keep it looking its best, start only when the engine is completely cool and the motorcycle is out of direct sunlight. Remove loose dirt, then apply Muc-Off x Harley-Davidson® Bike Wash — part of the officially licensed care range — to break down road grime across the engine's exterior surfaces.
Use the Muc-Off x Harley-Davidson® 3X Brush Kit to gently work between fins, recesses and other difficult-to-reach areas rather than scrubbing aggressively or blasting with close-range pressure. Rinse carefully before the cleaner dries and dry the engine thoroughly.
Once clean, apply Muc-Off x Harley-Davidson® Protect & Shine to suitable surfaces: it's designed to drive out moisture, help prevent corrosion and restore a deep black finish while preserving metal and chrome.
The most effective routine is clean, dry and protect — not shine over dirt. For heavy oil or grease contamination, use a dedicated compatible degreasing process rather than relying on an all-over wash.
Keep finishing products away from braking surfaces, grips, foot pegs and other sensitive electrical or intake components.
A Harley-Davidson engine can be pressure washed, but avoid blasting it with high-pressure water at close range, because water can be forced into electrical connections, seals, sensitive areas and definitely cover the Air filter with a suitable waterproof cover.
Work on a cool engine and use Muc-Off x Harley-Davidson® Bike Wash to loosen road dirt and grime. Gently agitate difficult areas with the Muc-Off x Harley-Davidson® 3X Brush Kit, rinse carefully from a sensible distance and dry thoroughly.
After washing, apply Muc-Off x Harley-Davidson® Protect & Shine to suitable surfaces to drive out residual moisture, help prevent corrosion and restore a deep black finish. Keep products away from braking surfaces and follow Harley-Davidson guidance for sensitive components.
The best way to clean Harley-Davidson wheels is with Muc-Off x Harley-Davidson® Bike Wash paired with the Muc-Off x Harley-Davidson® 3X Brush Kit. Start by rinsing away loose grit so it isn't rubbed across the finish, then apply Bike Wash to break down road dirt and grime.
Use the brush kit to gently agitate rims, spokes and other difficult-to-reach areas, then rinse thoroughly before the cleaner dries.
Dry with a clean Muc-Off x Harley-Davidson® Luxury Microfibre Polishing Cloth. If a wheel has heavy oily or greasy contamination, a dedicated compatible degreasing process may work better than repeated all-over washing.
Be especially careful around the braking system: don't apply Muc-Off x Harley-Davidson® Speed Wax, Protect & Shine or other finishing products to brake discs, pads or braking surfaces.
Regular cleaning also prevents brake dust and road grime from building into harder deposits, making future maintenance easier.
To remove brake dust from Harley-Davidson wheels, clean it before it becomes heavily embedded. With the wheels cool, rinse away loose grit, then apply Muc-Off x Harley-Davidson® Bike Wash to the wheel surfaces.
Use a suitable brush from the Muc-Off x Harley-Davidson® 3X Brush Kit to gently agitate the rim, spokes and areas where brake dust collects. Rinse thoroughly before the cleaner dries and dry with the Muc-Off x Harley-Davidson® Luxury Microfibre Polishing Cloth.
Keep all finishing products away from the braking system: do not apply Muc-Off x Harley-Davidson® Speed Wax or Protect & Shine to brake discs, pads or braking surfaces.
If brake dust has become baked onto a specialist wheel finish, check the Harley-Davidson finish-care guidance before using stronger chemistry or abrasive methods.
The best way to remove bugs from a Harley-Davidson is to use Muc-Off x Harley-Davidson® Bug & Tar Remover rather than aggressive scrubbing.
First make sure the surface is cool and out of direct sunlight, then wash and dry it so loose dirt cannot scratch the finish. Shake the Bug & Tar Remover, spray it onto the affected hard surface and allow it to penetrate for around one to two minutes; stubborn baked-on contamination may need longer, but do not exceed the product directions. Wipe away residue with a clean Muc-Off x Harley-Davidson® Luxury Microfibre Polishing Cloth.
The formula is safe on suitable paint, metal, chrome, hard plastics and glass. Follow with Muc-Off x Harley-Davidson® Protect & Shine or Speed Wax where appropriate.
The Muc-Off x Harley-Davidson® Motorcycle Care Range is officially licensed and developed specifically for Harley-Davidson motorcycles, with formulas designed to be safe and effective across paint, chrome, metal, carbon fibre, rubber and engine components when used as directed.
For a full rinse-based clean, use Muc-Off x Harley-Davidson® Bike Wash. For light dust and quick cleaning between rides, use Waterless Wash. Bug & Tar Remover targets bug splatter and tar on suitable hard surfaces.
Protect & Shine drives out moisture, helps prevent corrosion and restores a deep black engine finish while preserving metal and chrome.
Speed Wax provides an all-in-one polish and Carnauba Wax-based hydrophobic barrier on suitable paint, metal and plastic.
The 3X Brush Kit helps reach difficult areas, while the Luxury Microfibre Polishing Cloth supports safe drying and buffing.
For most owners, the core routine is simple: clean with Bike Wash, protect with Protect & Shine, then finish suitable glossy surfaces with Speed Wax.
Do you want to shop on our UK site?
Do you want to shop on the EU site?
Do you want to shop on the US site?
Muc-Off UK
Muc-Off US
Deutsch
Espanol
Francais
Italiano
Nederlands
Polski
